愛澤工業11月部分到貨產品專題及庫存

——HYDAC蓄能器皮囊篇

如下為我司（愛澤工業IZE INDUSTRIES）本月部分到HYDAC蓄能器皮囊,索取樣本資料和產品信息。

愛澤工業（IZE）定位于向良好制造工業提供制造技術和設備。代理經營*的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的協作團隊，為客戶提供良好解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的渠道。

愛澤工業為用戶提供咨詢、資料上門、輔助選型，售后安裝服務，操作人員免費培訓等服務

蓄能器皮囊

HYDAC SB330-20A1 皮囊 愛澤工業

Design

Standard bladder accumulatorSB330/400/500/550

HYDAC standard bladder accumulators consist of the pressure vessel, the flexible bladder with gas valve and the hydraulic connection with check valve. The pressure vessels are seamless and manufactured from high tensile steel.

Bladder accumulatorSB330N

The flow-optimised design of the standard oil valve enables the maximum possible operating fluid flow rate to increase to 25 l/s on this accumulator type.

High flow bladder accumulatorSB330H

HYDAC high flow bladder accumulators, type SB330H, are high performance accumulators with a flow rate of up to30 l/s. The fluid port is enlarged to allow higher flow rates.

Working temperature and operating fluid

The permitted working temperature of a bladder accumulator is dependent on the application limits of the metal materials and the bladder. Outside this temperature range, special materials must be used. The operating fluid must also be taken into account. The following table displays a selection of elastomer materials with temperature range and a rough overview of resistant and non-resistant fluids, on a case-by-case basis, information must be requested regarding the resistance and the resistance must be tested specifically